DBX 215

Product Details: Ask a question about this product

The dbx 2-Series Graphic Equalizers have been designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straight forward controls. The 215 not only provides standard features like dual channels, 15 2/3 octave bands, ISO frequency meters, /- 12dB input gain range, and switchable 50Hz/12dB octave low-cut filters, but also includes other thoughtful features. These features include: 20 mm faders; selectable /-6dB or /-12dB boost/cut range for precise gain adjustments; XLR, and 1/4" TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx? 2-Series has been pursued to make your job easier.

The 2-Series represents a major step forward in the performance of entry-level graphic equalizers. From its amazing 10Hz to 50kHz frequency response, to its 108dB dynamic range, internal toroidal transformer, the 2-Series offers out of this world specifications wit a own to earth price point. Sure to find a home in the studio, on tour and with installed sound venues, the 2-Series is destined to take its rightful place in tHe lineage of great dbx? signal processors that are the professional’s choice in signal processing. With such affordable quality, there’s no longer any excuse for compromising your sound.

Features:

• Two 15-band, 2/3-octave Constant Q frequency bands
• Switchable boost/cut ranges of ?6 or ?12 dB
• 12dB per octave, 3dB down @ 50Hz low-cut filter
• Front panel bypass switch
• ?12 dB input gain range
• 4-segment LED ladders for monitoring output levels
• XLR and TRS Inpts and Outputs
• Internal Toroidal Transformer
• Frequency Repsonse of <10Hz to >50kHx
• Dynamic range of greater than 108dB

Specifications:

• Input
  • Connectors: 1/4" TRS, female XLR (pin 2 hot)
  • Type: Electronically balanced/unbalanced, RF filtered
  • Impedance: Balanced 40k ohm, unbalanced 20k ohm
  • Max Input Level: > 21dBu balanced or unbalanced
  • CMRR: >40dB, typically >55dB at 1kHz
• Outputs
  • Connectors: 1/4" TRS, male XLR (pin 2 hot)
  • Type: Impedance-balanaced/unbalanced, RF filtered
  • Impedance: Balanced 100 ohm, unbalanced 50 ohm
  • Max Output Level: > 21dBu balanced/unbalanced into 2k ohm or greater > 18dBm balanced/unbalanced (into 600 ohm)
• System Performance
  • Bandwidth: 20Hz to 20kHz, 0.5/-1dB
  • Frequency Response: <10Hz to >50kHz, 0.5/-3dB
  • Dynamic Range: 108dB
  • Signal-to-Noise: 90dB
  • THD Noise: <0.004%
  • Interchannel Crosstalk: <-80dB, 20Hz to 20kHz
• Function Switches
  • EQ Bypass: Bypasses the graphic equalizer section in the signal path
  • Low Cut: Activates the 50Hz 12dB/octave high-pass filter
  • Range: Selects either /- 6dB or /- 12dB slider boost/cut range

• Power Supply

  • Operating Voltage: 100VAC 50/60Hz, 120VAC 60Hz, 230VAC 50/60Hz
  • Power consumption: 12W
  • Main Connection: IEC receptacle

• Product Manual