Martin Jem Hydra Head 115V

Be the first to review this product

Availability: Current Product

Regular Price: $1,305.00

Your Price: $953.50

OR

Quick Overview

Jem Hydra Head 115V

Martin Jem Hydra Head 115V

Double click on above image to view full picture

Zoom Out
Zoom In

Details

Martin Jem Hydra Head 115V The Hydra is a multi-headed fog generator which gives you total flexibility in fog placement through a maximum of 16 DMX controlled output heads, all serviced by one centralized base. Each output head can be placed up to an amazing 150m (330 ft) from the base unit and fired on demand through a full range of outputs - from gentle haze to a blindingly dense fog. Every effect for each and every moment. Each head is fed fluid from the base and can be individually synchronized into waves of different outputs and effects or brought together for a single, monstrous fog burst. The Hydra is fully DMX controllable from any DMX desk, while the temperature of the heads can be set directly from the centralized base to control dispersion rate. The base also monitors each head for total safety. Cleaning the units could not be simpler with a Service Mode that flushes clean the system ensuring pure, even firing every time. The Hydra is an ideal tool for club environments, being able to feed a range of spaces with different outputs, but its true application resumé is endless: from theme parks to musicals and world tours, the Hydra’s 300m reach even makes it ideal for quieter theatre applications. * Central base allows heads to be positioned up to 300 meters apart * Continuous output * 700 m³/min fog output (per head) * 1500 W heat exchanger * 9 min heat-up time * Can be mounted in any direction * 2 x 25 liter fluid capacity * Temperature control for different fluid options and applications * Automatic tank changeover * Low fluid sensing * Leak detection system * Optional self-sealed connectors for easy service * System is DMX controllable * Pre-programmed stand-alone macros * On-board control panel * Optional multifunctional remote control

Additional Information

Specifications
Physical
Length (Head): 440 mm (17.3 in.)
Width (Head): 392 mm (15.4 in.)
Height (Head): 167 mm (6.6 in.)
Dry Weight (Head): 13.8 kg (30.4 lbs.)
Length (Base): 664 mm (26.1 in.)
Width (Base): 392 mm (15.4 in.)
Height (Base): 939 mm (37.0 in.)
Dry weight (Base): 35 kg (77.2 lbs.) incl. two empty 25 l drums

Performance
Max. fog output (approx.): 700 m3 per minute per head
Max. operating time at full output (approx.): 60 minutes (full 16-head system)
Operating time: Continuous, automatic level adjustment
Warm-up time (approx.): 9 minutes

Control and Programming
Control options: Onboard control panel, DMX
Instant or timer-controlled variable output
Output is proportional for all levels above 12%
DMX channels: 1 per head, maximum 16
Protocol: USITT DMX512/1990
Optional digital remote control: For limited control

Construction
Housing: Steel & aluminum
Heat exchanger: 1500 W, direct thermal protection

Fluid System
Fluid pump: Low pressure pump in Base Unit supplies constant 2.5 bar pressure
Pump (EP5) in Head Unit increases 2.5 bar inlet pressure to 16 bar
Solenoid valve in Head Unit for instant cut-off
Onboard fluid capacity: 2 x 25 l
Fluid consumption at peak output: 120 ml per minute per head

Installation
Orientation (Head): Any
Orientation (Base): Floor mount only (On wheels)

Connections
DMX data: 3-pin and 5-pin XLR sockets
Remote control: 3-pin locking XLR
Power cable entry (Base): 3-pin IEC male socket
Power cable entry (Head): Hard-wired

Electrical
AC power (EU models): 220-240 V nominal, 50 Hz
AC power (US models): 110-120 V nominal, 60 Hz
Main fuse (220-240 V power) Head: 10 A
Main fuse (110-120 V power) Head: 15 A
Main fuse (220-240 V power) Base: 3.15 AT (slow blow)
Main fuse (110-120 V power) Base: 6.3 AT (slow blow)

Thermal
Maximum ambient temperature (Ta max.): 40° C (104° F)
Exterior surface temperature, steady state: 50° C (122° F)
Max. nozzle temperature: 200° C (392° F)
SKU 92250500
GTIN No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.