Details
Ever wonder why the last one standing at the end of the tour is the Roadie? The Roadie X-Stream is the most versatile professional atmospheric effects generator available today. By incorporating Jem's X-Stream Airflow System, the Roadie X-Stream blends fog and air to produce a variety of effects; from an optically translucent haze to an immensely dense "white-out" of fog.
The Roadie X-Stream has been designed to deal with the intense rigors of touring with a rigid chassis, protected on all eight corners by 20mm aluminum plates, and 40mm lifting bars. The outer casing and control panel also offer a degree of protection in poor weather conditions, making the Roadie X-Stream ideal for large outdoor stadium events. Overheat protection is also guaranteed through a unique, Direct Thermal Protection device.
The fog particulate is constant but can be diluted by increasing the airflow; transforming a dense fog into a light translucent haze, giving the right enhancement to high tech lighting. The Roadie is equipped with two large 2.5kW Hi-Mass Vaporizing Chambers, each with a twin, wide-bore, steel helicoil.
The Roadie X-Stream is fed by a massive 19-liter (5 US gallons) capacity and may be operated from a dedicated on-board, weather resistant control panel, an external DMX 512 source or via an optional PLC Interface.
Basic control is also possible via the Roadie X-Stream’s remote (optional), allowing the machine to be fired at preset levels. A bank of four "shortcut" presets is featured for those wishing to get the Roadie X-Stream into action quickly.
Features:
- 5000W heat exchanger
- 10 min heat up time
- 2 x 9.5 liter fluid capacity
- 5000m³/min smoke output
- On-board control panel
- Fog and fan control
- Run and delay time control
- On-board 2 channels 3 pin DMX
- DMX link
Additional Information
| Specifications | |
|---|---|
| The Roadie X-Stream blends fog and air to produce a variety of effects; from an optically translucent haze to an immensely dense "white-out" of fog. |
|
| Features | |
|
|
Physical | |
| Length: 1140 mm (44.9 in.) | |
| Width: 645 mm (25.4 in.) | |
| Height: 655 mm (25.8 in.) | |
| Dry weight: 167 kg (368.2 lbs.) | |
Performance | |
| Max. fog output (approx.): 5000 m3 per minute | |
| Max. operating time at full output (approx.): 108 minutes | |
| Operating time: Continuous, automatic level adjustment | |
| Warm-up time (approx.): 18 minutes | |
Control and Programming | |
| Control options: Onboard control panel, DMX | |
| Compatible remote controls: For limited control | |
| DMX channels: 2 (output and fan) | |
| Protocol: USITT DMX512/1990 | |
Construction | |
| Housing: Steel & aluminum | |
| Heat exchanger: 2 x 2500 W, direct thermal protection | |
Fluid System | |
| Fluid pump: Oscillating piston, high pressure X4 | |
| Onboard fluid capacity: 2 x 9.5 l | |
| Fluid consumption at peak output: 500 ml per minute | |
Installation | |
| Orientation: Floor or flying kit | |
Connections | |
| Remote control: 3-pin locking XLR | |
| DMX data: 3-pin locking XLR | |
| Power cable entry: IEC-EN60309-2 Socket (Cee Type) | |
Electrical | |
| AC power: 208 V 60 Hz / 220 - 240 V 50 Hz | |
| Main fuse (208-240 V power): Onboard 25 A Breaker | |
Thermal | |
| Maximum ambient temperature (Ta max.): 40° C (104° F) | |
| Exterior surface temperature, steady state: 50° C (122° F) | |
| Max. nozzle temperature: 200° C (392° F) | |
| SKU | 92230400 |
| GTIN | No |





